Does the Acer ICONIA Tab W500 Take an NVMe SSD?
Acer ICONIA Tab W500
Every one of 7 field reports observed SATA storage rather than NVMe.
That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.
Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.
Reported by field data
- Storage controller:
- Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
- Platform:
- Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
- Drives seen:
- SanDisk SSD P4 3, SanDisk SSD U100
Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.
Capacities seen
- 32 GB (100%)
Sizes found installed in field reports — not a ceiling. Larger drives work fine.
How we know
This answer is derived from 7 independent hardware reports for the Acer ICONIA Tab W500, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.
Check it yourself
On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.
More Acer laptops
Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.