Does the Aquarius Pro, Std, Elt Series Take an NVMe SSD?
Aquarius Pro, Std, Elt Series
Every one of 10 field reports observed SATA storage rather than NVMe.
That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.
Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.
Reported by field data
- Storage controller:
- Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller
- Platform:
- Intel Corporation 2nd Generation Core Processor Family DRAM Controller
- Drives seen:
- HGST HTS545050B7, WDC WD2500BPVT-7, WDC WDS120G2G0A-
Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.
Capacities seen
- 500 GB (30%)
- 250 GB (30%)
- 120 GB (30%)
- 750 GB (10%)
Sizes found installed in field reports — not a ceiling. Larger drives work fine.
How we know
This answer is derived from 10 independent hardware reports for the Aquarius Pro, Std, Elt Series, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.
Check it yourself
On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.
Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.