Does the Chuwi HeroBook Pro Take an NVMe SSD?
Chuwi HeroBook Pro
Every one of 33 field reports observed SATA storage rather than NVMe.
That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.
Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.
Reported by field data
- Storage controller:
- Intel Corporation Celeron/Pentium Silver Processor SATA Controller
- Platform:
- Intel Corporation Gemini Lake Host Bridge
- Drives seen:
- Netac SSD 256GB, KINGSTON OM8P0S3, Netac S535N8/256
Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.
Capacities seen
- 256 GB (71%)
- 250 GB (14%)
- 128 GB (14%)
Sizes found installed in field reports — not a ceiling. Larger drives work fine.
How we know
This answer is derived from 33 independent hardware reports for the Chuwi HeroBook Pro, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.
Check it yourself
On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.
More Chuwi laptops
Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.