Does the GPD P2 MAX Take an NVMe SSD?
GPD P2 MAX
NVMe storage was observed in reports for this laptop.
- Reports
- 31
- Saw NVMe
- 100%
- Fastest link observed
- PCIe Gen3 ×4
The fastest link we saw in real machines was PCIe Gen3 ×4. That is a floorobserved in field reports, not the slot’s ceiling — a faster drive still works because PCIe is backward compatible; it simply runs at the slot’s speed.
Field reports can’t tell us the physical connector, how many slots are empty, or which M.2 length fits. Check the service manual and the installed drive before you buy.
Reported by field data
- Platform:
- Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
- Drives seen:
- Phison E12 NVMe Controller, Silicon Motion SM2263EN/SM2263XT (DRAM-less) NVMe SSD Controllers, Sandisk WD SN560/SN740/SN770/SN5000 NVMe SSD
Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.
Disclosure: This post may contain affiliate links. If you purchase through these links, we may earn a small commission at no extra cost to you.
How we know
This answer is derived from 31 independent hardware reports for the GPD P2 MAX, of which 100% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.
Check it yourself
On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.
Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.