Technize

Does the Hewlett-Packard 635 Take an NVMe SSD?

Hewlett-Packard 635

Every one of 75 field reports observed SATA storage rather than NVMe.

That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.

Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.

Reported by field data

Storage controller:
Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
Platform:
Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
Drives seen:
Hitachi HTS54323, ST320LT007-9ZV14, SAMSUNG HM321HI

Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.

Capacities seen

  • 320 GB (55%)
  • 500 GB (30%)
  • 120 GB (10%)
  • 1 TB (5%)

Sizes found installed in field reports — not a ceiling. Larger drives work fine.

How we know

This answer is derived from 75 independent hardware reports for the Hewlett-Packard 635, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.

Check it yourself

On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.

Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.