Technize

Does the Hewlett-Packard TouchSmart tm2 Take an NVMe SSD?

Hewlett-Packard TouchSmart tm2

Every one of 25 field reports observed SATA storage rather than NVMe.

That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.

Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.

Reported by field data

Storage controller:
Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
Platform:
Intel Corporation Mobile 4 Series Chipset Memory Controller Hub
Drives seen:
TOSHIBA MK5056GS, Hitachi HTS72505, OCZ-VECTOR150

Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.

Capacities seen

  • 120 GB (43%)
  • 320 GB (29%)
  • 1 TB (14%)
  • 500 GB (14%)

Sizes found installed in field reports — not a ceiling. Larger drives work fine.

Check its RAM too →

How we know

This answer is derived from 25 independent hardware reports for the Hewlett-Packard TouchSmart tm2, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.

Check it yourself

On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.

Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.