Does the Packard Bell EasyNote_SJ51 Take an NVMe SSD?
Packard Bell EasyNote_SJ51
Every one of 11 field reports observed SATA storage rather than NVMe.
That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.
Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.
Reported by field data
- Storage controller:
- NVIDIA Corporation MCP67 IDE Controller
- Platform:
- Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
- Drives seen:
- SSD 240GB, WDC WD1600BEVT-1
Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.
Capacities seen
- 240 GB (50%)
- 160 GB (50%)
Sizes found installed in field reports — not a ceiling. Larger drives work fine.
How we know
This answer is derived from 11 independent hardware reports for the Packard Bell EasyNote_SJ51, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.
Check it yourself
On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.
More Packard Bell laptops
Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.