Does the THD PX1 Take an NVMe SSD?
THD PX1
Every one of 7 field reports observed SATA storage rather than NVMe.
That is useful evidence about the reported machines, but it does not prove that every configuration lacks an NVMe slot or that the installed SATA drive is 2.5-inch rather than SATA M.2. Check the service manual, connector, dimensions, and current drive before ordering.
Field reports can’t tell us whether the SATA drive is a 2.5-inch bay or a SATA M.2 slot, nor which M.2 length fits — check the service manual before you buy.
Reported by field data
- Storage controller:
- Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode]
- Platform:
- Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
- Drives seen:
- Hitachi HTS72323, TOSHIBA MK1255GS
Drives people actually had installed when they ran the report — not a compatibility list, and not the only drives that fit.
Capacities seen
- 320 GB (67%)
- 120 GB (33%)
Sizes found installed in field reports — not a ceiling. Larger drives work fine.
How we know
This answer is derived from 7 independent hardware reports for the THD PX1, of which 0% observed an NVMe drive. We read the PCI device list in each report to tell NVMe apart from SATA.
Check it yourself
On Windows, open Task Manager → Performance and click your disk to see its model and type. On Linux, run lsblk -d -o NAME,TRAN,MODEL and read the TRAN column.
Storage interfaces derived from linuxhw/LsPCI, licensed CC-BY-4.0.